Cessna Aircraft - Washer - S1450-6-14-080
Genuine OEM Part
Description: Washer
Part number: S1450-6-14-080
Product Overview:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Product Specification:
Cessna Standard S1450 Flat Washer
- Material: Carbon Steel
- Finish: Cadmium
- Inner Diameter: 0.39 in.
- Thickness: 0.08 in.
- Outer Diameter: 0.875 in.
Between AirParts' branded hardware products, and our Seller's hardware offerings, we have hundreds of thousands of hardware parts in stock.
| Dimensions | |
|---|---|
| Dimensions (W x H x D) | 3.95 x 6.05 x 0.25" inches |
| Length | 6.05" inches |
| Weight | 0.02 lbs |
| Specifications | |
|---|---|
| 8130-3 Eligible | YES |
| ATA Chapter | 20 ATA Standard Practices |
| Available Conditions | NE / NS |
| Country of origin | United States |
| ECCN / USML | EAR99 |
| Material | Carbon Steel |
| Schedule B | 7318.22.0000 |
| Type | Washer |
| Units of Measure (UoM) | Each |
| Brand | Cessna Aircraft |
| Condition status | NE - New |
