Andair - Replacement O-Ring - ORO375
Genuine OEM Part
Description: Replacement O-Ring
Part Number: ORO375
Alternate Part Numbers: 05-00704
REPLACEMENT O-RING FOR GAS375
Andair makes Gascolators for both 3/8" and 1/2" lines. Both types have a screw locking ring that prevents the bowl from coming off, and a facility for this to be wire locked. The bowl is internally sealed with a Viton (R) O-ring. A PTFE coated 70-micron Stainless Steel mesh is used as the filter screen.
The PTFE coating helps prevent water from passing, by maintaining it as a droplet formation. A large filter area is present and wide passages have been incorporated so that the pressure loss through the Gascolators is kept to an absolute minimum. There is a 1/8 NPT hole on the bottom of the bowl so it can be drained and also one on the top of the body. This one can be used as a pressure tapping or a filtered supply to the primer pump.
A selection of fittings can also be used with the GAS375 and the GAS500. All the Gascolator include a self-bleeding air bleed. Here, on first use, and immediately after the bowl/filter has been removed the air trapped inside will automatically be purged out.
Viton® BS O-rings – Viton® 75
Viton® BS O-rings have excellent resistance to high temperatures and a broad range of chemicals. Fluorocarbon (FKM) has an outstanding permeability and compression set.
|51 ATA Standard Practices and Structures
|NE / NS
|Country of origin
|United States of America
|ECCN / USML
|FAA Approval Code
|Highly fluorinated carbon-based polymer
|Total Shelf Life (days)
|Units of Measure (UoM)