AN4H-4A - Hex Head Machine Bolt

AN4H-4A – 1/4-28 x 1/2" Drilled Head Hex Bolt, Alloy Steel, Cadmium Plated

Available now on the Airparts.aero Marketplace.

Overview

The AN4H-4A is a high-strength, drilled-head hex bolt manufactured to the rigorous Air Force-Navy (AN) standard. This fastener is specifically engineered for tension-loaded joints in high-vibration environments where a positive locking mechanism is mandatory. Its defining feature is the set of holes drilled through the flats of the hexagonal head, which are designed for the installation of safety wire (lockwire). With a 1/4-inch diameter and a short 1/2-inch nominal length, this bolt is a staple for securing components and brackets where clearance is limited and reliability is paramount.

Forged from heat-treated alloy steel and protected by a durable cadmium plating, the AN4H-4A provides both exceptional strength and corrosion resistance. Its adherence to the AN specification ensures the full traceability and quality control required for any flight-certified application.

Key Features

• Drilled Head for Lockwiring: The hexagonal head is cross-drilled to facilitate the installation of safety wire, creating a positive, anti-rotation locking mechanism that is visually verifiable.

• High-Tensile Alloy Steel: Manufactured from heat-treated alloy steel (typically 4140 or 8740) to a minimum tensile strength of 125,000 PSI, providing exceptional strength for tension applications.

• Cadmium Plating: Coated with a sacrificial cadmium layer per QQ-P-416 for superior corrosion resistance and consistent lubricity, ensuring accurate torque application.

• Rolled Threads: Features 1/4-28 UNF-3A threads that are cold-rolled, not cut. This process significantly increases fatigue life by improving the grain structure at the critical thread roots.

• Short Body Design: The 1/2-inch length and 1/16-inch grip make this bolt ideal for securing thin materials and components in tight spaces.

• AN Standard Compliance: As a true AN-standard part, it guarantees interchangeability, dimensional accuracy, and material integrity for airworthy installations.

Technical Specifications

• Part Number: AN4H-4A

• Component Type: Drilled Head Hexagonal Bolt

• Governing Specification: AN4H / NASM4H

• Material: Alloy Steel (e.g., 4140, 8740), heat-treated

• Minimum Tensile Strength: 125,000 PSI

• Finish: Cadmium Plate per QQ-P-416, Type II, Class 2

• Diameter: 1/4 inch (0.250 inches)

• Nominal Length (under head to end): 1/2 inch (0.500 inches)

• Grip Length (Unthreaded Shank): 1/16 inch (0.0625 inches)

• Thread Specification: 1/4-28 UNF-3A

• Shank Condition: Undrilled (no hole for cotter pin)

Aircraft Compatibility

The AN4H-4A is a standard hardware component, not specific to a single aircraft model. It is used ubiquitously across all segments of aviation where engineering drawings specify a 1/4-28 drilled head hex bolt of this length. Applications span:

• Military Aircraft

• Commercial and Transport Category Aircraft

• General Aviation (Piston and Turbine)

• Rotorcraft

Note: Verification of applicability is the responsibility of the installer. Always consult the current version of the applicable Illustrated Parts Catalog (IPC) or maintenance manual to confirm part number eligibility for a specific location.

Applications

• Powerplant: Securing engine accessories, magnetos, vacuum pumps, engine baffles, and exhaust system brackets.

• Airframe: Attaching structural brackets, inspection panels, and system components located in areas of high vibration.

• Systems: Mounting hydraulic components, filter housings, and fluid line clamps.

Why Choose AN4H-4A?

In aviation, there is no substitute for certified hardware. An AN4H-4A bolt guarantees the specific material chemistry, heat treatment, and manufacturing processes essential for flight safety. The use of a commercial-grade or non-traceable bolt would introduce a catastrophic risk of failure due to lower tensile strength, poor fatigue life, and susceptibility to corrosion. This certified fastener, with its provision for positive locking, ensures the joint will remain secure under the most demanding operational conditions.

The AN4H-4A is defined not just by its material, but by its precise dimensional controls, particularly its 1/4-28 UNF-3A thread specification. The "3A" designation denotes the tolerance class for an external thread (A). Class 3 is the tightest tolerance class in the Unified National thread standard, reserved for applications where a close, precision fit is critical. This tight tolerance between the bolt's threads and the mating nut's Class 3B internal threads minimizes play and ensures a more uniform distribution of load across all engaged threads. In the high-cycle fatigue environment of an aircraft, this uniform load distribution is paramount. A looser Class 2 fit, common in commercial hardware, can cause the first engaged thread to carry a disproportionate amount of the load, creating a stress concentration that can lead to premature fatigue crack initiation and failure. The Class 3A fit of this AN bolt is a critical, engineered safety feature.

Note: This is a flight-critical hardware component. Installation must be performed by a certified mechanic. A calibrated torque wrench must be used to apply the correct torque value specified in the maintenance manual to achieve proper preload. Safety wire must be installed in accordance with standard practices (e.g., AC 43.13-1B), ensuring it is new, clean, properly tensioned, and twisted correctly, with the pigtail bent back to prevent injury.

Documentation

The specifications for this fastener are maintained under the National Aerospace Standards (NASM), which have superseded many of the original AN drawings. Publicly accessible summaries of these standards can often be found through standards organizations