Aeronautical Standards Group​​ - Fitting - AN944-101A
Aeronautical Standards Group​​ - Fitting - AN944-101A
AeroShell  Grease 64 14.1 oz - 550043640 - 64CTG
AeroShell Grease 64 14.1 oz - 550043640 - 64CTG

Aeronautical Standards Group​​ - Washer - AN960-10L
(0 review)

This washer is superseded by NAS1149F0332P

This combination does not exist.

Share :

Same day shipping on in-stock items.
Cutoff time is 8:30 PM EST.

Seller's on Airparts
$ 413.65
Sold By:

Fulfilled By : 
Airparts Aero

Available Qty: 2131
Shipping Days: 2
Sell On Airparts

Aeronautical Standards Group - Washer - AN960-10L
Standard Part

Description:     Washer
Part Number:     AN960-10L
Alternate Part Number:     MS9320-10, 095-10800, 911242-F

Item Description

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.

Features and Characteristics

Cross Sectional ShapeRectangular
Hole DiameterBetween 0.193 inches and 0.213 inches
Edge ShapeRound
Center Hole ShapeRound
ThicknessBetween 0.029 inches and 0.035 inches
Overall DiameterBetween 0.433 inches and 0.458 inches
Special FeaturesLight
Material SpecificationMil-s-7952 military specification single material response or qq-s-698 federal specification single material response
Surface TreatmentCadmium and chromate
Surface Treatment SpecificationQq-p-416, type 2, cl 3 federal specification single treatment response
Nondefinitive Specification/std DataA type and 1 grade and a class
FSC5310 Nuts And Washers

No Specification
Alternate Products