?unique=a705ddc)
?unique=a705ddc)
LOCK WASHER - MS35333-42
Military Standard Part
Description: LOCK WASHER, Internal Tooth
Part Number: MS35333-42
Alternate Part Number: AN936A616
Product Overview
A washer which is usually round with centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces.
MS35333-42 Features
| PARAMETER | CHARACTERISTICS | |
| Hole Diameter: | 0.384 inches minimum and 0.398 inches maximum | |
| Outside Diameter: | 0.670 inches minimum and 0.692 inches maximum | |
| Material Thickness: | 0.032 inches minimum and 0.040 inches maximum | |
| End Item Identification: | Mrap RG-33, A4 bradley fighting vehicle, A3 bradley fighting vehicle | |
| Hardness Rating: | 40.0 rockwell C minimum and 50.0 rockwell C maximum | |
| Material: | Steel comp overall | |
| Material Document and Classification: | 66 fed std all material responses overall | |
| Surface Treatment: | Chromate overall | |
| Surface Treatment Document and Classification: | NAS-90725 national std/spec single treatment response overall | |
| Style Designator: | Flat internal teeth |
This part is used on the following aircraft:
- •Bombardier Challenger 605
- •Bombardier Global Express
- •Textron Aviation Beechcraft Premier
- •Textron Aviation Cessna 500 Citation I-ISP
- •Textron Aviation Cessna 510 Citation Mustang
- •Textron Aviation Cessna 525 Citation Citationjet
- •Textron Aviation Cessna 680 Citation Sovereign
- •Textron Aviation Cessna 750 Citation X
| Dimensions | |
|---|---|
| Dimensions (W x H x D) | 0.69" x 0.39" x 0.03" Inch |
| Length | 0.69" Inch |
| Weight | 0.01 lb |
| Specifications | |
|---|---|
| 8130-3 Eligible | No |
| ATA Chapter | ATA 51 Standard Practices and Structures |
| Available Conditions | NE / NS |
| Cage Code | 96906 |
| Country of origin | United States of America |
| ECCN / USML | 9A991.d |
| FAA Approval Code | STD |
| Hazmat Code | Not Applicable |
| Hazmat(Y/N) | N |
| Material | Steel |
| NSN | 5310-00-595-7237 |
| Schedule B | 7415.21.0000 |
| Total Shelf Life (days) | Not Applicable |
| Type | Lock Washer |
| Units of Measure (UoM) | Each |
| Brand | Military Standards |
| Condition status | Depreciated |
| Size | 3/8" |
