?unique=8571190)
DA1605 – Dupli-Color Black Enamel (Gloss) High-Performance Coating
Available now on the Airparts.aero Marketplace.
The Dupli-Color DA1605 is a premium, high-solids general-purpose enamel spray paint designed for durability, high-gloss retention, and superior coverage. While widely used in the automotive and industrial sectors, the DA1605 is a staple in the aviation hangar for the refurbishment of ground support equipment (GSE), non-structural interior brackets, and engine compartment accessories that require a resilient, "factory-look" finish.
Formulated with an advanced EZ Touch® 360° Fan Spray Nozzle, the DA1605 allows for professional-grade application with minimal overspray. This enamel coating is engineered to be "high-build," meaning it fills minor surface imperfections and provides a thick, protective barrier against moisture, salt, and common shop chemicals. The "Black 12" designation refers to its deep, classic gloss black finish, providing a consistent aesthetic for everything from cockpit seat frames to landing gear toolings.
Key Features
High-Gloss Finish: Delivers a brilliant, deep black shine that resists dulling and chalking over time.
EZ Touch® 360° Nozzle: A wide-pattern fan spray nozzle that adjusts to spray at any angle, reducing finger fatigue and ensuring an even coat on complex geometries.
Fast-Drying Formula: Dries to the touch in 30 minutes and is handleable within 1 hour, significantly reducing downtime in the maintenance shop.
Superior Adhesion: Bonds strongly to metal, wood, and most plastics (when properly primed), providing a chip-resistant surface.
Chemical Resistance: Once fully cured, the enamel provides moderate resistance to gasoline, oil, and cleaning solvents common in the aerospace environment.
Technical Specifications
Part Number: DA1605
Manufacturer: Dupli-Color (Sherwin-Williams)
Coating Type: Modified Protective Enamel
Color: Gloss Black (Black 12)
Container Size: 12 oz. (340g) Aerosol Can
Flash Point: < 0°F (Extremely Flammable)
Dry Time: 30 Mins (Touch) / 1 Hour (Handle) / 7 Days (Full Chemical Cure)
Coverage: Approx. 12–15 sq. ft. per can
Application Temp: 60°F to 92°F (16°C to 33°C)
Common Aerospace & Hangar Applications
Ground Support Equipment (GSE): Refurbishing tow bars, jacks, and tool carts to prevent oxidation and improve visibility.
Non-Structural Interior Hardware: Painting seat rails, trim brackets, and pedestal bases where a high-durability finish is required.
Engine Baffles & Brackets: Providing a heat-resistant (up to approx. 250°F) finish for accessory brackets and air baffling.
Shop Tooling: Color-coding or protecting specialized maintenance jigs and fixtures.
Why Choose DA1605?
In the hangar, "rattle-can" paints are often viewed with skepticism, but the Dupli-Color DA1605 stands apart due to its high pigment load. Cheap hardware-store paints often require 4–5 coats to achieve full opacity; the DA1605 typically achieves total coverage in 2 coats. Furthermore, the modified enamel resin is specifically designed to be flexible, meaning it won't "spider-web" or crack when applied to components subject to thermal expansion or moderate vibration. It provides an efficient, cost-effective way to maintain the professional appearance and corrosion resistance of your support equipment.
The DA1605 is an Aerosol Enamel and requires specific surface preparation to ensure a long-lasting bond. For metallic surfaces, the substrate should be de-greased using an aviation-grade solvent (like MEK or MPK) and scuffed with a red Scotch-Brite™ pad.
Pro-Tip: To avoid "orange peel" texture, ensure the aerosol can is at room temperature before spraying. If the shop is cold, soak the can in warm (not hot) water for 5 minutes to increase internal pressure and improve atomization.
Safety Warning: This product contains volatile organic compounds (VOCs). Always use in a well-ventilated area or with a NIOSH-approved respirator. Do not use on primary flight control surfaces or high-heat engine components (exhaust/turbines) as this enamel is not rated for those specific structural or thermal environments.
