24113 - Cascade Machinery Hose Cut-Off 9 Hose Cutting Machine

24113 – Cascade Machinery Hose Cut-Off 9 Hose Cutting Machine

Available now on the Airparts.aero Marketplace.

Overview

The Cascade Machinery 24113, also known as the Hose Cut-Off 9, is a heavy-duty, industrial-grade hose cutting machine designed for maintenance, repair, and overhaul (MRO) facilities, as well as production environments where precision and safety are paramount. This machine is engineered to deliver clean, square, and consistent cuts on a wide variety of aerospace and industrial hoses, including high-tensile, multi-spiral reinforced hydraulic lines. A precise cut is the critical first step in building a reliable hose assembly, as it ensures the hose end sits flush against the fitting nipple, which is essential for a proper crimp and a leak-free seal under high pressure.

The machine is built around a powerful electric motor that drives a specialized, scalloped-edge cutting blade. This design pulls the hose into the blade, minimizing operator effort and preventing the heat generation and abrasive dust contamination associated with traditional abrasive wheel cutters. The robust construction, safety guards, and ergonomic design make the Hose Cut-Off 9 an indispensable piece of ground support and shop equipment for any operation that builds or maintains fluid conveyance systems.

Key Features

• Precision Cutting Blade: Utilizes a hardened, scalloped-edge steel blade that provides a clean, burr-free cut with minimal contamination.

• Powerful Electric Motor: Equipped with a high-torque motor designed for continuous duty cycles and cutting through tough, multi-spiral reinforced hose.

• Enhanced Safety: Features comprehensive blade guarding, a secure hose clamping/pinning system, and ergonomic operation to protect the user.

• Broad Hose Compatibility: Capable of cutting a wide range of hose types, from single-wire braid to multi-spiral hydraulic and industrial hoses.

• Durable Construction: Built with a heavy-gauge steel frame and high-quality components for long service life in demanding shop environments.

• Reduced Debris: The scalloped blade design produces significantly less smoke, debris, and contamination compared to abrasive cutting wheels.

Technical Specifications

• Part Number: 24113

• Component Type: Hose Cut-Off Machine

• OEM Manufacturer: Cascade Machinery & Electric, Inc.

• Hose Capacity: Up to 2" (inch) inner diameter, multi-spiral (6-wire) hydraulic hose.

• Blade Type: 9" Scalloped-edge, hardened steel cutting blade.

• Motor: 3 HP, 230V, Single Phase, 3450 RPM. Other motor configurations may be available; verify specific unit specifications.

• Actuation: Manual lever actuation.

• Dimensions: (Approximate) 24" L x 24" W x 22" H.

• Weight: (Approximate) 150 lbs.

Aircraft Compatibility

This is a piece of Ground Support Equipment (GSE) / MRO tooling. It is not installed on an aircraft but is used to fabricate and repair hose assemblies for a wide variety of aircraft, including but not limited to:

• Commercial Transport: Boeing, Airbus

• Business & Corporate: Gulfstream, Bombardier, Dassault, Textron Aviation

• General Aviation: Cirrus, Piper, Diamond

• Rotorcraft: Bell, Sikorsky, Airbus Helicopters

Note: The suitability of this machine is dependent on the hose specifications called out in the aircraft's maintenance and structural repair manuals.

Applications

• Hydraulic System Maintenance: Fabricating replacement hydraulic lines for landing gear, flight controls, and utility systems using fluids like MIL-PRF-83282 or Skydrol.

• Fuel System Hoses: Cutting fuel lines to precise lengths for engine and airframe applications.

• Pneumatic Lines: Sizing various low and high-pressure pneumatic hoses.

• Ground Support Equipment: Building and repairing hydraulic and fluid lines for jacks, mules, and other GSE.

Why Choose 24113?

The integrity of a hose assembly begins with a perfect cut. The Cascade Machinery 24113 is a professional-grade tool that eliminates the primary causes of premature hose failure: abrasive contamination and angled cuts. Unlike abrasive wheels that generate and embed grit into the hose liner, the 24113's steel blade produces a clean cut, ensuring the purity of the hydraulic or fuel system. The machine's power and design allow it to cut even the toughest 6-spiral hoses with ease and precision. For any MRO facility focused on safety, reliability, and efficiency, this machine is a cornerstone investment in quality.

The engineering principle differentiating the Cascade 24113's scalloped blade from a conventional abrasive wheel lies in the cutting mechanics. An abrasive wheel operates by material erosion, using high-speed friction to grind through the hose materials, which generates significant heat and particulate contamination. In contrast, the 24113's scalloped steel blade functions via shear cutting. The blade's sharpened, wave-like edges concentrate the cutting force at multiple points, cleanly severing the rubber, textile, and high-tensile steel wire reinforcement layers with minimal friction. This shear action is kinematically more efficient, requiring less energy and generating far less heat, thereby preventing thermal degradation of the hose's inner tube material at the cut face. This preserves the material integrity of the hose, which is a critical factor for ensuring a secure, long-lasting crimp.

Note: The 24113 is a piece of industrial machinery. Operators must read and understand the manufacturer's operating manual prior to use. Always wear appropriate Personal Protective Equipment (PPE), including safety glasses and gloves. Ensure all guards are in place and functioning correctly. The cutting blade is a wear item and must be inspected and replaced as required to maintain cut quality.

Documentation

No public-facing OEM or regulatory documentation was located for this part. Operator and maintenance manuals are supplied by the manufacturer, Cascade Machinery, with the equipment at the time of purchase.